USED 10,000 WATT MODIFIED SINE POWER INVERTER 12 VDC TO 120 VAC

$1,099.00 $770.00

1 in stock

1 in stock

Add cables

Add remote switch

Pay Over Time
 

Features

Features:

  • 10000W max continuous power
  • Modified sine wave with Pulse Width Modulation technology (soft start)
  • Volt meter on front panel to monitor your battery voltage
  • Amp meter on front panel to monitor your current use (rate at which battery is drained)
  • Over Temperature LED indicator
  • Over Load LED indicator
  • AC direct connect terminal block
  • On/off switch
  • Over Temperature protection
  • Over Load protection
  • Single cooling fan thermally controlled
  • Internally fuse protected
  • AC output short circuit protection
  • Auto reset on most fault conditions
  • Aluminum case for optimal cooling
  • Pre-wired for remote on/off switch
  • Pre-slotted mounting plate
  • Instruction manual
  • Free 1 year tech support
  • 1 Year warranty parts and labor

**THIS INVERTER REQUIRES TWO SETS OF 4/0 CABLE ( TOTAL OF 2 NEGATIVE AND 2 POSITIVE)**

Description

Click here to view video 

Specifications: USED and in great condition. Includes 1 year warranty.

Continuous output power: 10000 Watt
Surge power capability (peak power): 20000 Watt
DC input / operating voltage: 10 to 16 volts
Output voltage: 120 volts AC +/- 10%
Output wave form: modified sine wave with phase correction
Output frequency: 60 Hz +/- 1 Hz
Battery low voltage alarm: 10.5 +/- 0.5 volts
Battery low voltage shutdown: 10.0 +/- 0.5 volts
No load current: < 1.8 DC amps
Full load efficiency: 90%
1/3 load efficiency: 95%
No load minimum operating temperature: 30º F
Full load maximum operating temperature: 140º F
AC output socket type: quadruple type 2 -3 prong
High input voltage protection: 15V-17V
Low input voltage shutdown: 10V Internal fuse protection
UL maximum recommended per outlet 1500 watts
This inverter requires 2 sets of 4/0 AWT cable if you are going to run at 10000 watts

Dimensions:

  • Unit weight: 23.1 lbs.
  • Unit size L x W x H: 21 3/8 x 7 7/8 x 6 inches
  • Shipping weight: 25 lbs.
  • Shipping size L x W x H: 23 1/4 x 13 1/4 x 10 3/4 inches

**THIS INVERTER REQUIRES TWO SETS OF 4/0 CABLE ( TOTAL OF 2 NEGATIVE AND 2 POSITIVE)**

Product manual: Click here

Additional information

Weight 26 lbs